How To Flash Jio F90M [Jio F90M Flash File & Tool] : Are you using Reliance Jio F90M feature mobile phone and now searching a perfect method to flash Jio F90M keypad mobile? If yes then you have landed on right place. Here in this tutorial we will show you two different methods to flash Jio F90M mobile. Both methods are working and tested by us. So no need to worry about it’s stability. Simply download Jio F90M flash and tool from below download section and flash it by using any below flashing method.

Many users report that they are facing software related issues, hanging problem and auto reboot problem on Reliance Jio F90M keypad mobile.

If you are one of them who are facing the same issues or any other software bugs on the device then this post is for you. Just flash official firmware on Jio F90M to unbick it again.

About: How to flash Jio F90M Reliance mobile

Brand: Reliance Jio

Model: flash Jio F90M

Type: Keypad or feature phone

Firmware : Official Jio F90M flash file

Status: Stable without any issue

Download Reliance Jio F90M Flash File & Tool

Download Jio F90M Flash File – DOWNLOAD / Mirror

Download Jio F90M Flash Tool – QFIL Flash Tool Or MegafoneSWDownload tool

Pre-requirements To Flash Jio F90M Flash Files

  • Charge the device approx. 80%.
  • Working usb cable and pc/laptop is must to perform flashing process.
  • Flashing will reset your device completely.
  • Read the post carefully and then apply it on your own device.

How To Flash Jio F90M Keypad Mobile – [TWO Methods]

As I told you, we will show you to different methods to flash firmware on Jio F90M mobile. Firmware or flash file are same for both methods but flashing tools are different.

Just read the both methods properly and then choose any one method to install firmware on Jio F90m keypad mobile.

Method01 Flash Jio F90M Using QFIL Flash Tool

Method02 Flash Jio F90M Using Mega fone SW Download tool

Method01 Flash Jio F90M Using QFIL Flash Tool

Remember firmware file or flashing files are same for both flashing method but in this method we are going to use QFIL flash tool. QFIL flash tool is a Qualcomm cpu mobile flashing tool and workis in edl mode. Same as, it required the .mbn format firmware files to flash.

Let’s see how to flash Jio F90 with QFIL flash tool?

  • Download Jio F90M flash file or firmware and extract it on pc. Enter into firmware folder and find below three files. We will use them in next step.

jio f90m flash file

  • Now extract the download QFIl flash tool and run QFIL.exe” file as administrator. QFIL qualcomm flash tool will launch on your pc.

If you are using latest QFIL flash tool then select Build type as “Flat Build” in QFIL flash tool. if “build type” section is not available then just ignore it.

  • Click on “Browsebutton and browse the prog_emmc_firehose_8909_ddr_.mbn  file as shown in below screenshot

jio f90m firehose file qfil

  • In next step, click on “Load XML” button and select “rawprogram_unsparse.xml” file from firmware folder.

  • Again select “patch0” file

  • Now boot device into EDL or Emergency download mode

Power Off device >> Press & Hold Home Key + Insert USB cable quickly

If the device is properly connect with pc it will show “Qualcomm HS USB QDLoader 9008 comport under the “Device Manager >> Ports (COM & LPT) section”

Qualcomm HS-USB QDLoader 9008

  • Navigate to “Select Port” option from top of the tool and select “Qualcomm HS-USB QDLoader 9008” port.
  • Once the tool will detect the device, wait to install usb drivers automatically. [try again if it’s failed to detect the device]
  • After drivers installation, Click download button to start flashing process.

  • Flashing may take few minutes to flash firmware and after completing the flashing process, you may see “Flash Successful” message on the screen.
  • Unplug the device and reboot it normally.
  • All Done!!! you have successfully flashed your bricked Jio F90m mobile.

Method02 Flash Jio F90M Using Mega fone SW Download tool

This is an another flash tool to flash qualcomm based jio mobile phone. Above method is an easiest method to flash jio F90M mobile but in case, you have any issue try this flashing method. In this method we are going to use Mega fone SW Download tool.

  • Extract the downloaded Jio F90m firmware on pc.
  • Extract the downloaded Mega fone SW Download tool zip file on pc and run “Mega foneSWDownload tool.exe” file as administrator.

Mega foneSWDownload tool

  • Now come to device, power off >> press & hold volume up + volume down key together at the same time and attach USB cable.

If the device is properly connect with pc it will show “Qualcomm HS USB QDLoader 9008 comport under the “Device Manager >> Ports (COM & LPT) section”

  • Now click on “SearchPath” button from tool and load “prog_emmc_firehose_8909_lite.mbn” file from Jio f90m firmware folder.

  • Finally click on “DOWNLOAD” button to start flashing process. If the device is properly connected with pc, process will start and will take few minutes to flash.

  • In case device is not connected into edl mode properly, tool will show below error screen.

  • Wait to complete the flashing process for once and you will see the below screen in the end of successful flashing.

flash jio f90m

  • Unplug the device and reboot it again.
  • Done!!!

So guys this is all about “how to flash Jio F90M keypad mobile?” You have two different choices to flash firmware on Jio F90m device. Both are working and tested, so you may go with anyone.



Source link


Leave a Reply

Your email address will not be published. Required fields are marked *